Subject: WWW Form Submission
Date: Mon, September 6, 2010
To: Ken Adachi
I want to know that your device is – number 1 device Therefore I have questions for which I am pleasing asking your answers:
Water: how many ounces or ml of water – is there official declaration of the
Does your device have heating of the water
Electrodes: what are the dimensions: area? Lenght? Diametar?
What % of the total lenght – do electrodes need to be submerged durring the procedure
Polarity chage: does your device have automatic polarity change on the electrodes? Eevery how many seconds is the automatic polarity change?
Power regulation: does your device have manual power regulation: from 0,15uA to 1,20
mA (miliAmpers ) or 0,15 mA / cm2 on electrodes?
From what to what range of mA – can the power be regulated on your device?
Does your device have automatic turnoff
Voltage: what is begining voltage and ending output voltage on the electrodes ?
Ionisation: what is the finese of silver ions in microns that you guarantee that
your device produces.?
How many ppm is your device's optimal work?
Purchase – return period and warranty: whats the return period for US orders and
what for European orders
Warranty: some manufacturors have 3 yr warranty – how much is yours?
Do you have extended warranty and how much it is
Representation: do you have authorized representatives of your device here in LA?
Please for your fast and detailed answer:
I offer the generator as a premium gift. There is nothing that really breaks down and the generator will lasts for decades. If something does break that's not due to abuse or careless handling, or negligence, I'll fix it during the first year. I've never had anyone return a CS generator complaining that anything broke.
The generator I offer is based on a design which I call reverse polarity. I spent a lot of time with Bob Beck in the mid to late 1990s talking about how to make the most effective CS. Reverse polarity and one's focused intentions made the greatest difference and Beck came to realize this by 1997.
Making colloidal silver is more than a mechanical process, it's an ALCHEMICAL process. The clamping of the current to stop current runaway is a mechanical way to address the problem, but clamping the current lowers the voltage and that means it's takes hours to make CS that could be produced in 30 minutes or less.
The current rises in a saw tooth current waveform by using the reverse polarity method. I do it by hand and not automatically because it would remove the focused intent part of the equation and therefore lower the quality of the CS by a huge margin. .
To address some of your questions:
You can make as much colloidal silver as you wish, from 8 ounces up to 2 liters, depending on the size of electrodes used. The 6 inch electrodes will work in a 8 - 16 oz glass OK, but you can use them in a larger container as well. The longer the electrodes, the more surface area. The larger diameter, the more surface area, so it's a function of total surface area versus the time that is required to produce a certain ppm concentration. .Most of the electrodes are submerged except the last 1/2 inch where the electrodes enter the cable. You reverse the polarity every two minutes usually.
The generator does not heat the water. You heat the water in advance by boiling it first and then pouring it into a Pyrex container. a glass able to take the heat, or a clean coffee carafe.
The Generator includes a set of 14 gauge, 6 inch long, pure silver electrodes. The diameter of 14 gauge is the equivalent of 0.064 inches.
Yes, both electrodes are in the water while making CS and during polarity switch.
No current regulation is needed or desired for the reason already stated. Following my 5 pages of instructions, you will produce perfect CS the first time and every time.
There is no automatic turn off needed or desired. You turn off the generator when you've reached the degree of concentration desired. You are part of the process and you are there during the entire time you are making the CS. This is a CRITICAL point. This is the focused intent part, the alchemical part .
If you use the internal batteries, the voltage starts at 27 and when the CS is golden yellow, will read around 25-26 volts. When using the AC wall adapter, it starts at 50 volts (no load) using distilled water and will read around 35 volts when completed. It all depends on how concentrated you make the solution.
The particle size is already discussed in my CS generator page. Silver atoms come off the wire at 1.26 angstroms, that's a constant. What happens to the silver atoms after they are in the water is where current runaway and clumping enter the picture, and this is what is referred to as particle "size."
You are responding to claims made by other CS generator makers and I've answered these sort of technical e-mail questions on many occasions, but it gets a little old after a while. If technical claims spin your wheels, then you should go for the generator that gives you the most impressive technical explanations. The over whelming majority of those web sites are run by people who don't really understand the alchemical underpinnings of CS productions and try to out market each other with glitzy talk of ppm, current clamping, complicated circuitry, etc., etc.
The man who started the entire revolution of making CS yourself at home was Dr Bob Beck. He did it during the 1990's giving talks at hundreds of health expos and via his video lectures. He told me in 1998 that my generator design produced the highest quality CS that he's ever seen in his life.
I did not ask him for his opinion or endorsement. He simply told me that at one of the Beck breakfast meetings. He bought a generator from me even though I had offered to give him one free and afterward, I saw that he carried it with him wherever he went. And this is from the man who told me how to make colloidal silver in the first place.
All information posted on this web site is
the opinion of the author and is provided for educational purposes only.
It is not to be construed as medical advice. Only a licensed medical doctor
can legally offer medical advice in the United States. Consult the healer
of your choice for medical care and advice.